When it comes to repairing your wood floors, you may be considering different options like applying some new finish or coloring. However, there is another option that is not often thought of – refinishing. You may have heard of refinishing wood floors, but you might not know much about it. Basically, it is a process that can make your damaged or faded wood look brand new. Here are the basic steps that you can follow to refinish your wood floors.
The first step is to take out your damaged flooring. If possible, try to open up the floor. You need to remove as much debris as possible so that you can properly begin the refinishing process. Take pictures if you can so you can identify all the damage areas. You should start by sanding the floor smooth before you apply any sealant. This will allow you to create a smooth surface for the sealant application.
After the first sanding, apply at least three coats of the sealant. Make sure that you do not miss any spots. Let each coat dry thoroughly before you move on to the next one. As you sand each panel, you will notice that certain areas will become lighter and others will become darker. You can use a technique called cupping where you use a dampened toothbrush to fill in the dark spots.
If your damaged floor has sustained any breaks or damages, you may need to replace some portions of it. In order to do this, you must first repair or replace the piece that needs replacing. For example, you could use new flooring instead of just using staples to glue together the section you are working on. Even if your damaged piece still looks good, you may want to get a replacement just in case it needs further repair or restoration work down the road. Just be sure that you take care of your damaged piece properly during the process of refinishing so that you don’t end up with an uneven or mismatched finish.
In order to properly refinish a damaged wood floor, you will need to remove all of the existing finish. Although it may seem easier to just sand away all of the stain, using an abrasive agent will permanently damage the wood. Once you have finished sanding the floor, wipe it down with a wood deglazing product such as Kilz. Kilz is very easy to find at your local hardware store. This product works by restoring the original color and brightness of the wood while also helping to protect it from future spotting.
After applying the first coat of Kilz, cover the floor with a second coat and let it dry thoroughly before you move on to the next step of sanding. Sand the entire floor until it is smooth and even. When you are finished sanding, be sure to use only light sanding strokes so that you do not scratch or damage the wood. By applying an even amount of pressure when sanding, you can ensure that the finish stays in place for a lifetime. For more details on floor restoration visit Houston Cabinet & Hardwood Restoration the #1 furniture refinishing service Houston, TX.